Capture the Rain in South Yate and Become More Flood Prepared

Slow the flow of rainwater with a free rainplanter and help ease pressure on local drainage systems  

A new project for South Yate

The response to our Chipping Sodbury project was fantastic, and we heard from residents in Yate who would love to see something similar. So, the project team worked hard behind the scenes to make it happen, and we’re pleased to share that a second project has launched in South Yate. 

There are 100 free devices available for homes in the South Yate and The Birds area, where surface water flooding has affected residents in recent years. 

Find out more below. 

Express your interest in capturing rainwater in just a few seconds!

What Happening in South Yate?

Who? Our Rainwater, South Gloucestershire Council and Resilient Frome are teaming up to bring a free rainwater capture project to residents in South Yate. 

What? You can help tackle surface water flooding by ‘slowing the flow’ of rainwater with this free project. 

How? There are 100 free rainwater capture devices available, like rainplanters, for residents in certain areas. These devices capture and temporarily hold rainwater back from drainage systems, helping to reduce pressure on them. 

Where? The project is available to residents in certain areas of South Yate and The Birds. 

Get Involved: Express your interest by signing up in just a few seconds. 

Disclaimer: There are limited numbers of devices available, and properties must meet certain criteria. 

Brought to you by...

Why is this project important?

Surface water flooding has impacted South Yate in recent years.

It occurs when rain arrives too fast, overwhelming drainage systems, causing it to rush over surfaces or pool in unwanted places.  

Projects like this help ease pressure on local drainage systems by temporarily holding back large volumes of rainwater.  

One device alone holds back around 200 litres of rainwater.  

And together, across a community this amounts to 1000's of litres of water held back.  

This project won’t solve flooding, but it is an important piece of the puzzle, working alongside other flood resilience initiatives. 

Taking part couldn't be easier and it won't cost you a penny. Keep reading to find out more. 

What's on offer?

Residents in South Yate may be eligible for a free rainplanter and installation thanks to a project in collaboration with South Gloucestershire Council and Resilient Frome. 

Depending on availability, your preferences and available space, there are 3 options to choose from! 

Why take part? 

Help your street be more prepared for rainfall. Every device holds back rain that would otherwise rush into the drains, helping ease pressure on them when it rains.  

Put free rainwater to good use. Use the water you collect for your plants, outdoor spaces, washing the car and other jobs around the home.  

Brighten up your outdoor space. Your rainplanter comes with planting space, so it adds some colour as well as capturing rain.  

Free, including installation. The rainplanter and installation are completely free.  

Easy to take part. Sign up in a couple of minutes and we’ll do the rest. Installation usually takes under an hour, and you don’t need to be at home. 

How it works

Register your interest: Sign up and tell us a little about your property. It takes less than two minutes.  

We will get in touch: We will confirm your eligibility and help choose the best device for your home.  

We install it for you: Our friendly team installs the device. This usually takes less than an hour and causes no disruption.  

Start capturing rain: Your device starts working immediately, capturing rainwater, releasing it slowly, and helping to ease pressure your streets drains when it rains. 

Find out if you can start capturing the rain now.

Unsure about the impact a water butt might have?

Sometimes, simple is best.  

Water butts capture rainwater from your rooftop before it enters drains. The water is stored temporarily and slowly released.  

This means:  

  • During rainfall, not all the rain rushes into drains at the same time  
  • There is always space to capture future rain  

Across multiple roads, this adds to thousands of litres of water slowed from local drainage systems.  

Every drop held back makes a difference. 

Don't just take our word for it

“Great scheme I enjoy knowing I’m helping slow the flow and saving water.” - Householder

"The team were very helpful, they did a great job and were friendly." - Householder

"We would be happy to recommend Our Rainwater to others seeking practical and evidence-based rainwater management solutions and those who want to prioritise community engagement."

Reclaim the Rain 

FAQs

Section 1: About the Project 

Why is this project important?

It will help tackle surface water flooding, provide a store of water for dry spells and reduce pressure on local drains. One project alone will not solve surface water flooding, but together with other initiatives, they can contribute to better flood resilience. 

Is this really free?

Yes, completely. The device and installation are provided free of charge as part of a South Gloucestershire Council funded project. 

Will it really make a difference to flooding?

This project is designed to reduce pressure on local drainage systems. Whilst it won’t cure the problem, it is a piece of the puzzle to help make the area more flood resilient. 

What difference is your 200-litre water butt going to make alone?

Alone? Not loads, you’re right. But with 100 installed in your area, that is around 20,000 litres of rainwater slowed from entering local drains when it rains. 

Who is delivering this project?

This project is delivered by Our Rainwater in partnership with South Gloucestershire Council and Resilient Frome. 

Why South Yate?

Our Chipping Sodbury project got a great response, and residents in Yate asked for something similar. So we worked with South Gloucestershire Council and Resilient Frome to bring a project to South Yate, which has been affected by surface water flooding.  

We know not every street in Yate is covered and numbers are limited, so please sign up to find out if you’re eligible. 

Section 2: How Does it Work? 

Will it cause any disruption to my home?

Very little. Our professional installation team connects the device to your existing downpipe: no major works and no mess. Most installations take under an hour and you don’t even have to be at home. 

How do rainwater capture devices work?

These devices capture and temporarily store rainfall. This means that when it rains, less water rushes into drains all at once. This helps ease pressure on drainage networks, reducing the chances of surface water flooding on our streets and in our homes. 

Do I need a garden?

You need an outdoor space and a clear area near a downpipe. This could be a garden, yard, side passage or a space next to your door. Our team will assess the best option for your property when we get in touch. 

What if I already have a water butt?

That is great news! We love to see residents already capturing rain. You can still have an installation providing you have space. We can even link devices together. Get in touch and we will talk through the options. 

I work during the week, do I have to be in for my installation?

No, you don’t have to be in. If you are happy to give access to our installation team, we can take it from there! 

Section 3: What about other methods? 

Why aren’t other flood management measures being used?

Flooding cannot be solved by a single solution, so a range of approaches are often needed. This includes maintaining drainage systems, managing rivers, improving infrastructure and capturing rainwater where it falls. For this project, we’re focusing on rainwater capture as it can help reduce pressure on local drainage systems by temporarily holding back rainwater. This means rain doesn’t arrive all at once and complements other flood resilience methods. 

Section 4: Monitors 

What are the monitors for?

The monitors record water depth inside the tank. This tells us about the intensity of the rainfall and how the device performed. If a device is blocked, we can assess that without physically coming to check. 

Do I have to have a monitor?

If you do not want a monitor installed, you can opt out. We use the monitor to find out what happens to the rainplanters when it rains and how well they are working. This data is really important and also anonymous, so we recommend not opting out. 

Can I move the monitor around?

No, these monitors are the property of Our Rainwater, and disturbing them can limit the accuracy of the data they collect.

Connect with us

Our Rainwater Ltd,
The Innovation Centre
Rennes Drive,
Exeter,
England,
EX4 4RN

Our Rainwater® is a registered trademark of Our Rainwater Ltd.

[email protected]

Our Rainwater © 2026